Skip to content

307 Camera Bag

£483.00

5 year manufacturers guarantee

Select Colour:
Sage FibreNyte / Chocolate Leather (Olive Lining)
Select Colour:
Sage FibreNyte / Chocolate Leather (Olive Lining)
Sold out
Sold out

Model Number: 506248-54

Barcode: 5035627115207

The largest bag in the ‘7-series’ that we currently offer. Featuring a compartment for a 14” MacBook Pro, quick release front straps, ability to add tripod straps and the unique ‘PressTop’ doctors-bag style opening. Ability to carry a DSLR, several lenses, flash and accessories. Made in England with 3-layer waterproof FibreNyte fabric and real leather.

This is What's Included

Multiple layout options inside

Multiple layout options inside


Multiple layout options inside​ included inside are:​

  • Padded base​
  • 'SuperFlex 9-15' partition​
  • 'SuperFlex 10-18' partition​
  • 'V-Bridge 15' ​

 

There are 20+ different sizes/styles of padded dividers available to customise the bag to your gear:​

  • SuperFlex Partitions​
  • DF Dividers​
  • V-Bridge 15​ ​

 

Note: The partitions shown are not the 'SuperFlex 9-15' and 'SuperFlex 10-18 that are included with the bag.​

Press Top Feature

Press Top Feature


The '7 series' (107, 207, 307 & 307L camera bags) have a distinctive rectangular opening feature, comprising of two specially shaped fibreglass and aluminium wands that hold the zipped, main compartment open. This is known as the 'Billingham Press Top' feature and is a similar style to a doctors 'Gladstone' bag.​ ​

 

The hinge between the wands either side is made of fabric to prevent users experiencing a mechanical failure and provide an easy and quicker opening than a typical doctors bag.

Extra pockets inside

Extra pockets inside


The main compartment is padded on all 4 sides, plus the padded basepad.​ ​

 

Behind the front padded wall of the main compartment are two equally sized slim pockets, ideal for items such as filters and diaries.​ 

 

Behind the back padded wall of the main compartment is a single slim pocket, big enough for a MacBook Pro 14", MacBook Pro 13" (4th Gen or newer), MacBook Air 13" or 13.6" (3rd Gen or newer), iPad Pro 12.9" or Surface Pro (1-8 & X).​ ​

*Pre-2018 we produced this bag with the back pocket being stitched together. After feedback in 2018, we then started producing this bag without the stitching so that you could use this area as an internal pocket. If you have the pre-2018 version, you can carefully unpick the stitching here only to create this pocket as it shouldn't cause any problems elsewhere in the bag. Please do not unpick the stitching at the front of the bag as this will cause the front dump pockets to come undone. 

 

Please note these pockets are padded on one side.

Front pockets

Front pockets


The front dump pockets feature a press stud close and have ample space for batteries, cables, SD cards, lens cloths and any other bits and pieces you wish to carry. An additional loop in the fabric on the side of the front pockets are a deliberate design feature to allow clip on pens.

Rear pocket

Rear pocket


The back pocket of this bag is a generous size and great for storing easily accessible documents or notes. ​ ​

 

The rain flap over the top is made of the same 3-layer waterproof fabric as the rest of the bag to help protect the zip from the elements.

Sculpted top flap

Sculpted top flap


The main flap has a central, double layered, waterproof seam which gives the bag a distinctive rounded look. ​ ​

 

By extending over the ends of the bag, the top flap provides excellent protection from dust and weather, as well as creating a classic, sleek look.

Additional grab handles

Additional grab handles


With the top flap open you'll see another detail that makes all the difference - two internal leather grab handles, that  means you can carry the bag safely without closing it. For extra flexibility the front handle can even be unclipped and removed if required.

Adjustable shoulder sling

Adjustable shoulder sling


The shoulder sling is made of strong woven polyester. You can adjust the length to suit your height and shooting style.​ ​

 

The sling is compatible with the SP20 and SP50 (recommended) shoulder pads.

 

The SP50 (pictured) is included for added comfort.

Delta Sling and Optional Delta Pockets

Delta Sling and Optional Delta Pockets


Where the shoulder sling attaches to the bag it splits into an inverted 'Y' shape at each end. This split sling helps to prevent any tipping or rolling motion as you move.​ ​

 

The bottom ends of this split sling is also where optional Delta Pockets can be clipped onto, providing extra space or organization when you need it.​ ​

 

Note: The Delta pocket in the picture is Khaki Canvas / Tan Leather, however all 307 bags are made of FibreNyte fabric.

QRS front straps

QRS front straps


The 307 features flared 'Quick Release System' leather front straps. You can open them one handed, even while wearing gloves.​ ​

 

The dual holes in the straps allow you to adjust the amount that the bag expands, depending on how much gear you are carrying.​ ​

 

Below and behind the flared front straps are two cutouts where you can thread optional 5/8 Tripod Straps through.

Craftmanship

Craftmanship


  • Made of a 3-layer waterproof material​
  • Real, full-grain, vegetable tanned leather​
  • Solid brass fixings​
  • Individual serial number​
  • 5-year manufacturers guarantee​
  • Made in England
The Bag

External dimensions

W390mm (14⅛") x D210mm (8¼") x H300mm (11⅞")

Internal dimensions (Main Compartment)

W350mm (13¾") x D150mm (5⅞") x H220mm (8⅝")

 

The 'D' measurement is flexible up to about 170mm (6¾”).

Capacity (Main Compartment)

11.2 litres (0.39 feet³)

 

Weight

2.01 kgs (4.43lbs)

 
 
 
 
Pockets
 

5 in addition to the main compartment.

 
 
 
 
Front external dump pockets (x2)

Internal dimensions (individual)

W130mm (5⅛") x D60mm (2⅜") x H210mm (8¼")

Capacity

0.75 litres (0.03 feet³)

 
 
Front Internal Pockets Inside Main Compartment (x2)

Internal dimensions (individual)

W140mm (5½") x D Nominal x H240mm (9½")

Capacity

Nominal

 
 
Rear Internal Pocket Inside Main Compartment

The main compartment is padded on all 4 sides, plus the padded basepad.​ ​

 

Behind the front padded wall of the main compartment are two equally sized slim pockets, ideal for items such as filters and diaries.​ ​These pockets are padded on one side.

 

Behind the back padded wall of the main compartment is a single slim pocket, big enough for a MacBook Pro 14", MacBook Pro 13" (4th Gen or newer), MacBook Air 13" or 13.6" (3rd Gen or newer), iPad Pro 12.9 or Surface Pro (1-8 & X).​ ​This pocket is also only padded on one side.

Capacity

Nominal

 
 
Rear zip pocket

Internal dimensions

320mm (12⅝") x D Nominal x H170mm (6¾")

Capacity

Nominal

 
 
Shoulder sling

Length

Can be adjusted between 1110mm (43¾") to 1610mm (63⅜") approx.

Width

50mm (2")

 

Compatible with SP20 and SP50 Shoulder Pads. The SP50 Shoulder Pad is included when you purchase the 307.

 
 
SP50 Shoulder Pad (included)

External dimensions

W80mm (3⅛") x D12mm (½") x L255mm (10")

 

'D' measurement excludes fixings on top.

Weight

0.09kg approx (0.2 lbs)

 
 

You can find out sizing for each specific part of the product. Just select a section from the below options to find out more details.

External dimensions

W390mm (14⅛") x D210mm (8¼") x H300mm (11⅞")

Internal dimensions (Main Compartment)

W350mm (13¾") x D150mm (5⅞") x H220mm (8⅝")

 

The 'D' measurement is flexible up to about 170mm (6¾”).

Capacity (Main Compartment)

11.2 litres (0.39 feet³)

Weight

2.01 kgs (4.43lbs)

5 in addition to the main compartment.

Internal dimensions (individual)

W130mm (5⅛") x D60mm (2⅜") x H210mm (8¼")

Capacity

0.75 litres (0.03 feet³)

Internal dimensions (individual)

W140mm (5½") x D Nominal x H240mm (9½")

Capacity

Nominal

The main compartment is padded on all 4 sides, plus the padded basepad.​ ​

 

Behind the front padded wall of the main compartment are two equally sized slim pockets, ideal for items such as filters and diaries.​ ​These pockets are padded on one side.

 

Behind the back padded wall of the main compartment is a single slim pocket, big enough for a MacBook Pro 14", MacBook Pro 13" (4th Gen or newer), MacBook Air 13" or 13.6" (3rd Gen or newer), iPad Pro 12.9 or Surface Pro (1-8 & X).​ ​This pocket is also only padded on one side.

Capacity

Nominal

Internal dimensions

320mm (12⅝") x D Nominal x H170mm (6¾")

Capacity

Nominal

Length

Can be adjusted between 1110mm (43¾") to 1610mm (63⅜") approx.

Width

50mm (2")

 

Compatible with SP20 and SP50 Shoulder Pads. The SP50 Shoulder Pad is included when you purchase the 307.

External dimensions

W80mm (3⅛") x D12mm (½") x L255mm (10")

 

'D' measurement excludes fixings on top.

Weight

0.09kg approx (0.2 lbs)

Can fit the MacBook Pro 13 (4th Gen), MacBook Air (3rd Gen), iPad Pro 12.9 or Surface Pro (1-7-X) in its unpadded pocket in the back of the main compartment.

DSLR with a lens attached (e.g. Canon 1DX, Nikon D6, Canon 5D, Nikon D850) plus 1-3 lenses depending on their size. Tall enough for a 70-200mm lens not attached to camera.

Mirrorless camera with a lens attached (e.g. Fujifilm XT-4, Sony A7IV, Canon R6, Nikon Z7 - with or without a battery grip) plus 1-3 lenses depending on their size.

Two rangefinder cameras (e.g. Leica M10, Leica M6) with lenses attached and 4 spare lenses.

Medium format cameras (Fujifilm GFX 100, Hasselblad H6D, Hasselblad 500CM etc) with lens attached and 1-3 extra lenses.

No. All of our bags are made of 3 layers that are bonded together; the outside Canvas or FibreNyte, a middle layer of butyl rubber and the internal lining. It is this middle layer of butyl rubber that prevents water passing through, therefore your bag will not need re-proofing. 

We strongly recommend not putting your bag in a washing machine or exposing it to harsh chemicals as this will break down the butyl rubber and therefore the bag will no longer be waterproof. 

If you get a hole in the fabric, this can also mean the bag is no longer waterproof and we recommend contacting us as we offer a repair service.  

An SP50 Shoulder Pad is already included when you purchase this bag, therefore you only need to buy another if you have lost or damaged yours. 

It isn't a laptop compartment! Apple have just made their latest devices small enough to fit. Please note it definitely won't fit older/larger devices such as the MacBook Pro 13 (3rd Gen) or any 15 inch MacBook. Also the fit is slightly tight - there won't be room to put 13 inch MacBook's in a padded sleeve.

 

Wikipedia has articles about the MacBook Pro and MacBook Air which should help you identify which device you have (it lists the dimensions!).

No - on this bag the padding is sewn into the walls of the bag. However, the padded dividers are removable (they attach inside with Velcro®).

If you have a 307 that was produced pre-2018, you may find that the back pocket is stitched together. After feedback in 2018, we then started producing this bag without the stitching so that you could use this area as an internal pocket. If you have the pre-2018 version, you can carefully unpick the stitching here only to create this pocket as it shouldn't cause any problems elsewhere in the bag. Please do not unpick the stitching at the front of the bag as this will cause the front dump pockets to come undone. 

Expert Reviews

Review by Imran

 

Customer Reviews

Read real reviews from real customers.

Note: 20% British VAT will be added on deliveries to United Kingdom


Your cart is currently empty.

Continue shopping
  • {{ item.final_price | money }}  ({{ item.quantity }})

    {{ item.product_title | pre_title }}

    Size: {{ item.properties['_Size'] }}

    Colour: {{ item.properties['_Colour'] }}